Type some words to find content.
eg: fuse, arrestor, 00110115 technical, MCCB...
Recent searches
Tehnical support
This email address is being protected from spambots. You need JavaScript enabled to view it.
3MEM40-EVRS energy meters

3MEM40-EVRS energy meters

3MEM10-EVRS energy meters

3MEM40-EVRS energy meters are intended for energy measurements in the three-phase and one phase electrical charger stations due to allowed high temperature operation (up to 70'C). Measuring energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates power, energy, current, voltage, power factor, power angle, frequency, harmonics of THD voltage and THD current harmonics.

 

 

 

 

Features:

 
  • 3 DIN modules width three phase direct connected DIN-rail mounting meter.
  • Class 1 for active energy according to EN 62053-21.
  • class B according to EN 50470-3.
  • Reference frequency 50 Hz or 60 Hz.
  • Maximum current 40 A (Imax).
  • Basic current 5 A (Ib).
  • Reference voltage 3×230 V/400 V (Un).
  • Voltage operating range (-20 % … +15 %)Un.
  • Two row display 6+2 digit (10 Wh resolution) with backlight.
  • Multifunctional front LED.
  • IR Serial communication.
  • RS485 Serial communication.
 

 


                                                                                                                                                                        

 

Home24h – Smart home of the Future

Home24h – Smart home of the Future

Home24h – Smart home of the Future

 

ETI participated in the European project Home24h - Smart home of the future for a comfortable and healthy living and working environment.

 

EV Smart Charger - Electric vehicle charging station

EV Smart Charger - Electric vehicle charging station

EV Smart Charger

E-mobility market is changing rapidly and becoming more and more sustainable. That is why we are pleased to present the new EV Smart Charger line of charging stations for electric vehicles. New line offers the most advanced solutions and a full range of products for residential or commercial needs.

 

 

  Advantages:

 
 - Stylish and compact design
 - Adjustable power up to 22 kW
 - Charging Mode: MODE 3, with cable and cable holder (CASE C) or without cable (CASE B)
 - Connector standard Type 2 
 - WI-FI connectivity in Client or Access Point mode Start Charging with RFID cards or Web APP for EVPLUS Series
 - Status monitoring via Web APP
 - Web App configuration management

 

 Catalogue

     
                                                                                                                                                                  

 

CLBSV - Compact Load Break Switch

CLBSV - Compact Load Break Switch

Compact Load Break Switch - CLBSV  

CLBSV are manually operated multi-pole devices for switching low voltage electrical circuits with currents up to 160A.  Main novelty is that these devices got visible contacts.

 

 

 

 

 

  Features:

 - Possibility to connect additional contacts with pre-break function

 - Double-visible chain break ensures safe maintenance

- Possibility of direct, external front and side control

 - Terminal covers provide protection against accidental contact and phase separation of the switch, and Perforated holes allow for contact temperature monitoring without removing the covers

 - Ability to seal terminal covers

 

 

 Catalogue

                                                                                                                                                                        

 

ATS controller (ATSC25)

ATS controller (ATSC25)

ATS controller (ATSC25)

ATSC25 “ATS Controller” in association with an RTSE (Remote transfer switching equipment) forms an ATSE (Automatic transfer switching equipment), the ATSE formed by the association is designed for use in power systems for the safe transfer of a load supply between a normal and alternate source.

 

 
 

 

 

 

 

 

 Catalogue

                                                                                                                                                                        

 

Network Analyzer END25ETH

Network Analyzer END25ETH

Network Analyzer END25ETH

END25ETH meters measure important electrical parameters in 3 phase 4 wire,3 phase 3 wire and 1 phase 2 wire network. It is more advanced instrument, with ETHERNET interface (MODBUS TCP/IP), real time clock and data logging (8MB memory).

 

 

 

 

 

  Features:

 - Measurement of 85 parameters, THD and harmonics up to 31st for voltage & current

 - Fully configurable LCD screen - possibility of programming 28 independent screens

- RTC - real time clock (END25ETH only)

 - LCD display with Back-light

 - Remote access of measured parameter via RS-485 (Modbus RTU) or through Ethernet interface (Modbus TCP/IP)

 

 

 

 
 

 

 Catalogue

                                                                                                                                                                        

 

EPC Polyester enclosures

EPC Polyester enclosures

EPC enclosures 

NEW Polyester EPC enclosures are reinforced with fiber glass provide double insulation class in IP66 protection. They be used outside (PV systems, up to 1500VDC) or in industry applications.

 

 

NEW Fuse holder EFH 1500V d.c. PV

NEW Fuse holder EFH 1500V d.c. PV

NEW Fuse holder EFH 1500V d.c. PV

ETI has developed new fuse holder EFH 1500V d.c. PV with unique, reliable nad ecologically friendly solution with the most compact design on the market.

Due to their versatility, they allow us to use the same combination cabinets for different photovoltaic systems, so you can install our entire  1500 V gPV fuse-link range with rated currents from 2 A to 63 A in a fuse holder of the same size.

 

New NH3L gPV fuse-link with 630A rated current

New NH3L gPV fuse-link with 630A rated current

New NH3L gPV fuse-link with 630A rated current

NH3L gPV 1500V d.c. fuse-links family has expanded with a new member. We have developed a fuse-link for a rated current  630A. Currently, this is the only fuse-link on the world market with such a high amperage in a 3L housing.

 

 

New type of terminal blocks - ETICONNECT

New type of terminal blocks - ETICONNECT

New type of terminal blocks - ETICONNECT

Push in terminal blocks for quick and reliable connection without tools. Connection of up to four conductors with cross-section from 0,5 to 4 mm2.

 

 

 

 

 

 

 

 

 Catalogue

                                                                                                                                                                        

 

Your basket is empty.